American fashion brand replica watches Coach (COACH) 2015 spring and summer series of bags rolex replica large ad exposure. COACH The large ads using the replica watches new generation of large numbers of models, the replica watches brand into a new vitality, fashion photographer Steven louis vuitton replica Meisel Executive mirror. Tablets, coming supermodel replica watches Leona Binx hermes replica Walton, Valery Kaufman, Grace Hartzel, Molly Blair, Dylan Xue, Helge Vondereau rolex replica and Julia Bergshoeff joint appearance at omega replica the New York skyline, the breitling replica perfect interpretation of classic American replica handbags Coach modern style.

Standards

The Ontario Ministry of Labour established the following list of Canadian, American and World Wide Standards under:

"Guideline for Pre-Start Health and Safety Reviews: how to apply section 7 of Regulation for Industrial Establishment "

Standards listed in bold are accepted by the Ministry as good engineering practice in complying with the Regulation for Industrial Establishments. Standards not listed in bold have not been reviewed by the Ministry, but are considered good practice. Such standards must be reviewed by a professional engineer to ensure that adherence to them would satisfy all the requirements of the Regulation for Industrial Establishments.

CSA Standards:

CSA Z432 04
Safeguarding of Machinery

CSA Z142 02
Code for Power Press Operation: Health, Safety, and Guarding Requirements Machinery

CSA Z434 03
Industrial Robots and Robot Systems - General Safety Requirements Machinery

CSA Z615 87 (R2000)
Code for Hot Forging Producers, Health and Safety Requirements Machinery



ANSI Standards:

CSA Z432 04
Safeguarding of Machinery

ANSI B11.1 2001
Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care, and Use

ANSI B11.2 1995 (R2000)
Machine Tools - Hydraulic Power Presses, Safety Requirements for Construction, Care, and Use

ANSI B11.3 2002
Machine Tools - Safety Requirements for Power Press Brakes

ANSI B11.4 2003
Machine Tools - Safety Requirements for Shears

ANSI B11.5 1988 (R1994)
Machine Tools - Iron Workers - Safety Requirements for Construction, Care, and Use

ANSI B11.6 2001
Safety Requirements for Manual Turning Machines with or without Automatic Control

ANSI B11.7 1995
Machine Tools - Cold Headers and Cold Formers, Safety Requirements for Construction, Care, and Use

ANSI B11.8 2001
Safety Requirements for Manual Milling, Drilling and Boring Machines with or without Automatic Control

ANSI B11.9 1975 (R1997)
Grinding Machines, Safety Requirements for the Construction, Care, and Use of

ANSI B11.10 1990
Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of

ANSI B11.11 2001
Safety Requirements for Gear and Spline Cutting Machines

ANSI B11.12 1996
Machine Tools - Roll-Forming and Roll-Bending Machines - Safety Requirements for the Construction, Care, and Use

ANSI B11.13 1992 (R1998)
Machine Tools - Single- and Multiple-Spindle Automatic Bar and Chucking Machines - Safety Requirements for Construction, Care and Use

ANSI B11.14 1996
Machine Tools - Coil-Slitting Machines Safety Reqirements for Construction, Care, and Use

ANSI B11.15 2001
Safety Requirements for Pipe, Tube, and Shape Bending Machines

ANSI B11.16 1988
Metal Powder Compacting Presses, Safety Requirements for Construction, Care, and Use Administratively Withdrawn 7/28/2000

ANSI B11.17 1996
Machine Tools - Horizontal Hydraulic Extrusion Presses,- Safety Requirements for Construction, Care, and Use

ANSI B11.18 1997
Machine Tools - Machines and Machinery Systems for Processing Strip, Sheet, or Plate from Coiled Configuration - Safety Requirements for Construction, Care, and Use

ANSI B11.19 2003
Performance Criteria for Safeguarding

ANSI B11.20 1991 (R1997)
Machine Tools - Manufacturing Systems/Cells - Safety Requirements for Construction, Care, and Use

ANSI B11.22 1997
Machine Tools - Machine Tools Using Lasers for Processing Materials - Safety Requirements for Design, Construction, Care, and Use

ANSI B65.1 1995
Safety Standard - Printing Press Systems

ANSI B65.2 1999
Safety Standard - Binding and Finishing Systems

ANSI B65.5 1995
Safety Standard - Stand-Alone Platen Presses

ANSI 01.1 1992
Woodworking Machinery - Safety Requirements (electronic copy currently unavailable)

ANSI Z244.1 1982
Safety Requirements for the Lockout/Tagout of Energy Sources (under review)

ANSI Z268.1 1982
Metal Scrap Processing Equipment (electronic copy currently unavailable)

ANSI ALCTV 1998
Automotive Lifts - Safety Requirements for Construction, Testing and Validation (electronic copy currently unavailable)

ANSI ALOIM 2000
Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance (electronic copy currently unavailable)

ANSI 15.06.5 1999
Industrial Robots and Robot Sytems - Safety Requirements

ANSI/SPI B151.1 1997
Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use

ANSI/SPI B151.27 1994
Plastics Machinery - Robots Used with Horizontal Injection Molding Machines - Safety Requirements for the Integration, Care, and Use

ANSI Z245.1 1999
Refuse Collection, Processing, and Disposal Equipment - Mobile Refuse Collection and Compaction Equipment - Safety Requirements (see additional requirements issued by MOL)

ANSI Z245.2 1997
Equipment Technology and Operations for Wastes and Recyclable Materials -Stationary Compactors - Safety Requirements

ANSI Z245.5 1997
Equipment Technology and Operations for Wastes and Recyclable Materials - Baling Equipment - Safety Requirements



World Standards:

Type A Standards

ISO 12100 1&2
Safety Of Machinery: Basic Concepts, General Principles for Design (electronic copy currently unavailable)

ISO 12100:1999
Safety of Machinery - Principles of Risk Assessment

IEC 61508 1 Ed. 1.0 b:1998
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements

IEC 61508 2 Ed. 1.0 b:2000
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems

IEC 61508 3 Ed. 1.0 b:1998
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements

IEC 61508 4 Ed. 1.0 b:1998
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations

IEC 61508 5 Ed. 1.0 b:1998
Functional safety of electrical/electronic/programmable electronic safety related systems - Part 5: Examples of methods for the determination of safety integrity levels

Type B Standards

ISO 13852:1996
Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs

ISO 13853:1998
Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs

ISO 13854:1996
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

ISO 13855:2002
Safety of machinery - Positioning of protective equipment with respect to the approach speeds of parts of the human body

ISO 13851:2002
Safety of machinery - Two-hand control devices - Functional aspects and design principles

ISO 14120:2002
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards

ISO 14118:2000
Safety of machinery -- Prevention of unexpected start-up

ISO 14119:1998
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection

ISO 13856-1:2001
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

IEC 60947 5-1 Ed.2.2 b.2000
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

IEC 60947 5-2 Ed.2.1 b.1999
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

IEC 60947 5-3 Ed.1.0 b.1999
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions

ISO 4413:1998
Hydraulic fluid power -- General rules relating to systems

ISO 4414:1998
Pneumatic fluid power -- General rules relating to systems

IEC 61496 1 Ed. 1.0 b:1997
Safety of machinery - Electrosensitive protective equipment - Part 1: General requirements and tests

IEC 61496 2 Ed. 1.0 b:1997
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

Type C Standards

Machines for cold working of metals

DIN EN 692
Mechanical presses - Safety (FOREIGN STANDARD)

DIN EN 693
Machine tools - Safety - Hydraulic presses; English version of DIN EN 693 (FOREIGN STANDARD)

Rubber and plastic machines

DIN EN 201
Rubber and plastics machines - Injection moulding machines - Safety requirements (FOREIGN STANDARD)

DIN EN 289
Rubber and plastics machinery; compression and transfer moulding presses; safety requirements for the design (FOREIGN STANDARD)

DIN EN 422
Safety of rubber and plastics machines - Blow moulding machines intended for the production of hollow articles - Requirements for design and construction (FOREIGN STANDARD)

DIN EN 1114 1
Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders (FOREIGN STANDARD)

DIN EN 1114 2
Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers (FOREIGN STANDARD)

DIN EN 1114 3
Rubber and plastics machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs; English version of DIN EN 1114-3 (FOREIGN STANDARD)

DIN EN 1417
Rubber and plastics machines - Two roll mills - Safety requirements (FOREIGN STANDARD)

DIN EN 1612 1
Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units (FOREIGN STANDARD)

Packaging machines

DIN EN 415 1
Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment; English version of DIN EN 415-1 (FOREIGN STANDARD)

DIN EN 415 2
Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines; English version of DIN EN 415-2 (FOREIGN STANDARD)

DIN EN 415 3
Safety of packaging machines - Part 3: Form, fill and seal machines; English version of DIN EN 415-3 (FOREIGN STANDARD)

DIN EN 415 4
Safety of packaging machines - Part 4: Palletisers and depalletisers (FOREIGN STANDARD)

EN 415 5
Wrapping Machines (electronic version currently unavailable)

EN 415 6
Machines for form collective packaging (electronic version currently uavailable)

EN 415 7
Machines to ensure cohesion of load units (electronic version currently unavailable)

Food processing machines

DIN EN 1678
Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (FOREIGN STANDARD)

SS EN 1974
Food processing machinery - Slicing machines - Safety and hygiene specifications (FOREIGN STANDARD)

Wood working machines

DIN EN 848 1
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines (FOREIGN STANDARD)

DIN EN 848 2
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines (FOREIGN STANDARD)

DIN EN 848 3
Safety of woodworking machines - One-side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines (FOREIGN STANDARD)

DIN EN 859
Safety of woodworking machines - Handfed surface planing machines (FOREIGN STANDARD)

DIN EN 860
Safety of woodworking machines - One-side thickness planing machines (FOREIGN STANDARD)

DIN EN 861
Safety of woodworking machines - Surface planing and thicknessing machines (FOREIGN STANDARD)

DIN EN 940
Safety of woodworking machines - Combined woodworking machines (FOREIGN STANDARD)

Tannery machines

DIN EN 972
Tannery machines - Reciprocating roller machines - Safety requirements (FOREIGN STANDARD)

DIN EN 930
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (FOREIGN STANDARD)

DIN EN 931
Footwear manufacturing machines - Lasting machines - Safety requirements (FOREIGN STANDARD)

DIN EN 1035
Tannery machines - Moving plate machinery - Safety requirements (FOREIGN STANDARD)

EN 1845
Footwear moulding machines (electronic version currently unavailable)

Miscellaneous

DIN EN 775
Manipulating industrial robots; safety (ISO 10218:1992, modified) (FOREIGN STANDARD)

DIN EN 1525
Driverless industrial trucks and their systems (FOREIGN STANDARD)

ISO 10472 1:1997
Safety requirements for industrial laundry machinery -- Part 1: Common requirements

ISO 10472 2:1997
Safety requirements for industrial laundry machinery -- Part 2: Washing machines and washer-extractors

ISO 10472 3:1997
Safety requirements for industrial laundry machinery -- Part 3: Washing tunnel lines including component machines

ISO 10472 4:1997
Safety requirements for industrial laundry machinery -- Part 4: Air dryers

ISO 10472 5:1997
Safety requirements for industrial laundry machinery -- Part 5: Flatwork ironers, feeders and folders

ISO 10472 6:1997
Safety requirements for industrial laundry machinery -- Part 6: Ironing and fusing presses

ISO 11111:1995
Safety requirements for textile machinery

DIN EN 12626
Laser processing machines - Safety requirements (ISO 11553:1996, modified) (FOREIGN STANDARD)